ASTM A179 Seamless Tubes Specification
Carbon Steel ASTM A179 seamless tube Supplier: ASME SA179 seamless tubes with Various Radius, Plain End, 2.11mm Thickness, 4300mm Length, OD 19.05mm, ASTM A213 Standard.
ASTM A179 U Tube OD 19.05mm 2.11mm Thickness Length 4300mm.
Name: A179 Tubes.
Size: OD 19.05 mm.
Wall Thickness: 2.11 mm.
Length: 4300 mm.
Material: ASTM A179
Ends: Plain End.
ASTM A179 tube, also called ASME SA179 steel tube, is a kind of low-carbon tubes shall be made by the seamless process and shall be cold drawn. We supply ASTM A179 seamless tubes usual dimensions vary from 3.20 to 76,20mm for outer diameter, it has very good cold working performance, suitable for flanging, bending with no need of heating edges, hardness of the tubes may not exceed 72 hr or flanging test should be made in order of one of every two of the tubes selected batch of 250 pieces.
ASTM A179 steel tube equivalent: DIN17175,BS 3602 Part I, NF-A 49-212, NBR 5583
Carbon Steel ASTM A179 seamless tube Supplier: ASME SA179 seamless tubes with Various Radius, Plain End, 2.11mm Thickness, 4300mm Length, OD 19.05mm, ASTM A213 Standard.
ASTM A179 U Tube OD 19.05mm 2.11mm Thickness Length 4300mm.
Name: A179 Tubes.
Size: OD 19.05 mm.
Wall Thickness: 2.11 mm.
Length: 4300 mm.
Material: ASTM A179
Ends: Plain End.
ASTM A179 tube, also called ASME SA179 steel tube, is a kind of low-carbon tubes shall be made by the seamless process and shall be cold drawn. We supply ASTM A179 seamless tubes usual dimensions vary from 3.20 to 76,20mm for outer diameter, it has very good cold working performance, suitable for flanging, bending with no need of heating edges, hardness of the tubes may not exceed 72 hr or flanging test should be made in order of one of every two of the tubes selected batch of 250 pieces.
ASTM A179 steel tube equivalent: DIN17175,BS 3602 Part I, NF-A 49-212, NBR 5583
Tensile Requirement
Steel Grade
|
Yield Strength(Mpa)
|
Tensile Strength(Mpa)
|
ASTM A179
|
≧180
|
≧325
|
Chemical Requirement
Steel Grade
|
C
|
Mn
|
P≤
|
S≤
|
Si≤
|
ASTM A179
|
0.06-0.18
|
0.27-0.63
|
0.035
|
0.035
|
0.25
|
ASTM A179 Seamless Tube Test
We adopt very rigorous methods to ensure that all of our A179 seamless tubes conform to international quality standards. With this purpose in mind, we run all of these tubes through some of the toughest quality tests, including the likes of Spectro Analysis, Micro and MacroTest, Flaring Test, Hardness Test, Flattening Test, PMI Testing, Mechanical Testing such as Tensile of Area, Pitting Resistance Test, Intergranular Corrosion (IGC) Test, etc. It is only when these A179 seamless tubes have cleared all of these tough quality tests, do we then dispatch them to our clients.
ASTM A179 standard covers minimum-wall thickness, seamless cold-drawn steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Our steel mills have fabricating employees that have 5-10 years of working experience. If you are interested in buying ASTM A179 seamless steel tube products, contact us now for the latest price or check the following table for equivalent steel grade of ASTM A179.
No comments:
Post a Comment