SA283Gr.C Steel Sheet Manufacturer

SA283Gr.C Steel Sheet Manufacturer in China

SA283Gr.C steel sheet is manufactured using the finest grade of raw material purchased from reliable vendors to provide international quality of flawless goods. These sheets can be cut to shape, thickness and size according to clients fabricated needs. This SA283C grade is said to hold higher value as it provides high yields and tensile strength. The manufacturing process of SA283Gr.C asme carbon steel sheets and plates are performed by cutting, machining or drilling machining, grinding and at last testing.

Easy customization is provided to customers so the diverging needs and various applications in industries can be met on a satisfactory level. We aim at catering to the best quality goods at most competitive rates at reasonable rates. Moreover, excellent service is also provided through timely delivery. The SA283Gr.C steel sheet is a structural carbon that can be brought into an application where low or intermediate tensile strength is required.

Chemical Composition of SA283Gr.C Steel Sheet(%)

C	Mn	P	S	Si	Cu
0.24	0.90	0.035	0.04	0.40 0.15-0.40	0.20

Mechanical Properties of SA283Gr.C steel sheet

Tensile strength	Yield strength, min, [MPa]	Elongation in 2"	Elongation in 8"
55,000 75,000 psi [380 - 515 MPa]	30,000psi [205 MPa]	25% min	22% min

Marking and Packing for SA283Gr.C Steel Sheet:

After the production and testing process is being completed marking of certain information is being done on the product. These imprints include lot number, grade specification, trademark, and also dimensions being done on the product. Lastly, packaging and supply of goods require extra care to ensure damage free flawless range of product handling to our patrons. Packing of these plates is done into customized packaging. In general, packing is done in heavy cardboard boxes, wooden crates, etc. customers can also specify their packing option at the time of signing consignment.

Testing and Document for SA283Gr.C Steel Sheet 

We have efficient and skilled personnel for inspecting the quality of the supplied materials. Conscious quality testing is also done in our industry. As our primary initiative is to provide a quality product we keep on improving the quality of the product also they are well appreciated by our customers. Along with the end products, we make sure that required quality test certificates and specified test certificates are also attached by our mill analyzers. Various tests are being performed to double check the quality of goods. Some of the tests are namely Hardness test, ultrasonic testing, Charpy impact testing, chemical composition tests, microscopic analysis, and many more. 

GB Carbon Steel Company
Contact Amber
Shanghai Katalor
Email: klsteelamber@outlook.com
Skype: klsteelamber@outlook.com
Mobile: 0086-15137876175

Carbon Steel A36 Steel H Beam Section Steel

Carbon steel A36 steel H beams supplier in China, A36 equivalent grade, A36 section steel

H-beam is an economical section steel and efficient section with more optimized cross-sectional area allocation and more reasonable weight-to-weight ratio. It is named because its section is the same as the English letter "H". Since all parts of the H-beam are arranged at right angles, the H-beam steel has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

Carbon Steel A36 Steel H Beam Section Steel Features

Carbon steel A36 steel H beams exhibit greater tensile and yield strength and also greater corrosion and heat resistance. These plates are also having good formability and thus as better for cutting. These H beams are made of the alloy material providing ease to machining and fabrication. This alloy is also having secured welding adaptability. The ASTM A36 steel sections are the common structural plates that can be galvanized easily to provide an increase in resistance to corrosion.

This alloy is the most common type of steel alloy. These A36 steel sections are being designated by the American society for testing and material designation, especially for the carbon steel. These plates are having an excellent feature of ductility and elongation. This alloy is chemically composed of following materials like carbon, copper, sulfur, phosphorus, silicon, and manganese.

Testing for Carbon Steel A36 Steel H Beam

There are many of the following tests conducted by Katalor Industry to examine the full properties of the ASTM A36 Mild Steel Sectoin. These tests are conducted to examine the mechanical properties of the product and to know their limits of sustenance in different types of atmospheric conditions. The testing’s conducted are the hardness test, impact test, eddy current test, flattening test, micro and macro test, ultrasonic test, and intergranular test. There are several chemical and spectral analysis conducted to examine the correct composition of the chemical elements.

Application for Carbon Steel A36 Steel H Beam

Carbon steel A36 steel H beams are widely used in various building structures, bridges, vehicles, brackets, machinery, etc., for example, the industrial structure of the steel bearing bracket,steel piles and underground engineering supporting structure, petro chemical and powerand other industrial equipment structure, shipbuilding, machinery manufacturing frame structure,train, car,tractor beam bracket,port conveyors,high speed shutter stents.

Contact Amber
Shanghai Katalor
Email: klsteelamber@outlook.com
Skype: klsteelamber@outlook.com

Mobile: 0086-15137876175

Metal 1018 Vs 1045 Steel

Both metal 1018 and 1045 steel grades are two grades of carbon steel as defined by the Society of Automotive Engineers (SAE). These classification number describe the components in the steel alloy as well as the properties of the finished metal. Steel alloys can have a wide range of properties, so it is very important to have the correct grade of steel for a particular application. If you want to purchase 1018 steel,1045 plate from China supplier, pls send RFQ to klsteelamber@outlook.com.

1018 Cold Rolled Steel

The steel 1018  has a carbon content of 0.18 percent. It is the most common of the cold-rolled steels. 1018 is better steel for carburized parts, since it produces a harder and more uniform case. 1018 steel also has higher mechanical properties and better machinability due to the cold drawing process. In this process, oversize hot rolled bars, which have been cleaned of scale, are drawn through dies to the required size. Cold drawing increases tensile and yield strength but decreases ductility. Cold drawing also increases torsional strength, surface hardness and wear resistance. Due to size limitations of the cold drawing process, large diameter bars are generally turned and polished, the hot roll rounds usually machine turned, rather than drawn, then abrasively polished. 1018 carbon steel products are available in rounds, flats, squares and hexagons, has a relatively large size selection.
1018 Steel Hardening 
This grade of steel is not normally subjected to hardening and tempering treatments as the hardness obtained from such treatments would not warrant their being performed. Carburizing might be carried out at 1620-1690ºF (880-920ºC,) and carbonitriding at 1470 -1600ºF (800-875ºC.)

1045 Carbon Steel Steel

1045 is a medium-carbon steel, made with 0.45% carbon. Medium-carbon steels are stronger than low-carbon steels, but not as easy to weld, and can be tempered by quenching. Yield strength for 1045 steel is much higher than that of 1018, at 76,900 psi, so if the steel needs to flex and return to its original shape, 1045 steel would be preferred to 1018. The elongation of 1045 steel is 12%, so if you need a piece of steel that would stretch before breaking, 1018 is a better choice than 1045.

NM400 Abrasion Resistant Steel Equivalent

NM400 Abrasion Resistant Steel Equivalent: HARDOX400, XAR400, B-HARD400, RAEX400.

NM400 abrasion resistant steel which is also known as (AR steel) wear resistant steel, is developed to have longer service life than mild steel. is an abrasion resistant plate with a hardness of 400 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.

If you want to purchase NM400 steel plates or NM400 steel equivalent, pls send RFQ to klsteelamber@outlook.com 

NM400 Abrasion Resistant Steel Properties

NM400 abrasion resistant steel can significantly improve the wear resistance of mechanical related parts, so it improves the service life of the machine and reduces the production cost. The surface hardness of the product usually reaches 360 ~ 450HB, so M400 is a suitable structural steel plate for processing and manufacturing wear-resistant and wearing parts for mines and various construction machinery.

Standard: GBT 24186

Realtive grades: NM360, NM500, NM550,NM600

NM400 Abrasion Resistant Steel Equivalent

China	Japan	Switzerland	German	Bao Steel
NM	JFE	SSAB	DILLIDUR	Hardox
NM400	JFE-EH400	HARDOX400	400V	Hardox400

Sampling test of NM400 wear-resistant steel plate

NO.	Test	Sample Quantity	Sampling Method	Test Method
1	Tensile Test	1	GB/T2975	GB/T 228
2	Impact Test	3	GB/T2975	GB/T 229
3	Hardness	1	GB/T2975	GB 231

Hardness test: Milling 1.0-2.5mm on the surface of the steel plate, and then performing hardness test on this surface. It is commonly recommended that you mill out 2.0 mm for hardness test.

Delivery condition of NM400 abrasion resistant steel plate: abrasion resistant steel plates are usually delivered in condition of quenching and tempering.

API 5L PSL1 Pipeline Steel Pipes X42, X56, X60,X70

API 5L PSL1 pipeline steel pipes are produced in seamless type and ERW welded types. API 5L PSL1 seamless pipes and welded pipes are mainly used for pipeline in the transportation of petroleum and natural gas.

IF you want to purchaseAPI 5L PSL1 Grade B, X42, X70 steel pipe, pls send RFQ to klsteelamber@outlook.com.

The table shows the chemical composition of API 5L PSL1 pipeline steel pipes from Grade A to Grade X70, as well as their mechanical properties.

Source: API 5L specification

API 5L PSL1 Pipeline Steel Pipes

API 5L PIPE PSL1	Chemical Composition				Mechanical Properties
	C (Max)	Mn (Max)	P (Max)	S (Max)	Tensile strength ( Min. )		Yield strength ( Min. )
					Psi X 1000	Mpa	Psi X 1000	Mpa
Grade A25	0.21	0.6	0.03	0.03	45	310	25	172
Grade A	0.22	0.9	0.03	0.03	48	331	30	207
Grade B	0.26	1.2	0.03	0.03	60	414	35	241
Grade X42	0.26	1.3	0.03	0.03	60	414	42	290
Grade X46	0.26	1.4	0.03	0.03	63	434	46	317
Grade X52	0.26	1.4	0.03	0.03	66	455	52	359
Grade X56	0.26	1.4	0.03	0.03	71	490	56	386
Grade X60	0.26	1.4	0.03	0.03	75	517	60	414
Grade X65	0.26	1.45	0.03	0.03	77	531	65	448
Grade X70	0.26	1.65	0.03	0.03	82	565	70	483

API 5L PSL1 Pipeline X42, X56, X60,X70 Pipes Suppliers & Exporters

We Are Supplying API 5L PSL1 Grade B, X42, X56, X60,X70 Pipes With Customized Sizes And Shapes In Wide Varieties To Make Sure That Our Client’s Requirements Is Not Compromised. Hence, They Get Exact Dimension Of The Grade B Pipes As Per Their Applications. We Have Experts With The Years Of Experience Working With All Kind Of Industries To Make Sure That We Can Resolve All Our Client’s Doubts Regarding The Dimensions And API 5L Grade B Material Quality. Also, We Give Them The Better Suggestions About Their Piping System.

Q345 Steel Yield Strength

Q345 steel is one kind of Chinese standardized low alloy steel under GB/T1591-2018 standard. "Q" in Q345 material means yield strength, and 345 indicates that the yield strength of this steel is 345MPa. Q345 steel plates and sheets aer widely used in bridges, vehicles, ships, constructions, pressure vessels, special equipment, etc.
Q345 can be divided into Q345A, Q345B, Q345C, Q345D, Q345E according to the quality grade. They represent mainly different temperatures of impact.
If you want to purchase Q345B, Q345C steel, pls send RFQ to klsteelamber@outlook.com.

Q345 steel yield strength

The yield strength or yield point is the material property defined as the stress at which a material begins to deform plastically. Prior to the yield point the material will deform elastically and will return to its original shape when the applied stress is removed. Yield strength of Q345B is 345 Mega Pascals. Like most steels of its grade, it suffers elongation before it pulls apart, typically at 20-21 percent of its initial length.
The tensile strength of Q345 steel is the maximum amount of tensile stress that it can take before failure, for example breaking. Steel tensile strength is expressed in units of force divided by cross sectional area; in the Metric system, this unit is known as the Pascal. One Pascal is a Newton  per square meter. The tensile strength of Q345 steel is rated at 470 to 660 Mega Pascals.

Q235 Quality Steel Vs Q345 Quality Steel

The lower limit of the yield strength of Q235 is 235 MPa, and the lower limit of the yield strength of Q345 is 345 MPa (Q means the Chinese character "yield", the latter value represents the lower limit of yield strength) 2. The alloy content of the two is different: Q235 is ordinary carbon steel, Q345 For low alloy steel

Q235 is a carbon structural steel, compared with the old standard GB700-79 grades A3, C3

Q345 is a low-alloy structural steel, compared with the old standard 1591-88 12MnV, 16Mn 16MnRE, 18Nb, 14MnNb